Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Longwood, FL | Ashgrove Locksmith
We provide independent Schlage lock service across Longwood, from rekeys and deadbolt swaps in the older 32750 core to smart lock installs in The Springs. If you also need Car Key Replacement in Longwood, we handle that too. What sets our Schlage work here apart isn’t just knowing the hardware; it’s knowing what Longwood’s humidity and HOA rules do to it. We’re not a Schlage authorized dealer, and we don’t pretend to be. We’re a local locksmith shop that stocks OEM Schlage parts and knows the line’s failure points cold. If you’ve got a sticking B60 deadbolt or an Encode keypad that won’t wake up, call (833) 713-2331.
Why Longwood Residents Choose Us for Schlage Service
Schlage makes good hardware. But a lock that’s been breathing Central Florida air for a decade needs more than a generic handyman with a screwdriver. Glenn Tarpley, our owner, trained at Valencia College’s vocational program in Orlando and has been working Schlage locks in this area for over two decades. He knows a corroded B60 cylinder from a worn one, and he’ll tell you the difference. We carry OEM Schlage cylinders, pins, and keypad modules so repairs match the original finish and tolerances. That matters when your door frame has shifted in the heat and the deadbolt has to land square. We serve every Longwood zip: 32750, 32752, 32779, and 32791. For a deeper look at what we do with the brand, see our Schlage sales & service page.
Styles & brands we work with
Common Schlage Locksmith Problems We Solve in Longwood
- Keys sticking or breaking in B60/B62 deadbolts. Longwood’s humid summers get inside lock cylinders. Pins and springs gum up, then a key snaps off in the middle of July. We extract, clean, re-pin, and get the cylinder turning smoothly again.
- BE365 and Encode keypads going dead after storms. Heavy afternoon thunderstorms and months of moisture push these keypad units past their limits. Batteries drain fast, touchpads stop responding, and Bluetooth or Z-Wave pairing drops. We diagnose whether it’s the battery, the module, or the board.
- Builder-grade F-Series knobs wearing out in 1970s and 80s slab homes. The older houses around downtown Longwood still have their original Schlage F-Series knobsets. Loose spindles, stripped screws, doors that don’t latch square. Sometimes a rebuild kit fixes it; sometimes replacement is the honest call.
- Gate and side-door Schlage hardware seizing up. Deadbolts on outbuildings and side doors that haven’t been cycled since last hurricane season tend to lock up. We free them, lubricate them properly, and replace anything corroded beyond saving.
- HOA finish mismatches on new deadbolts. If you bought a Schlage deadbolt online and the finish doesn’t match your community’s spec, it might not pass an HOA hardware inspection. We’ll confirm the spec and install the correct finish.
Schlage Service in Longwood: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic Schlage service page. Longwood’s HOA-governed communities along the Markham Woods corridor and in The Springs often write a uniform front-door hardware finish into their covenants. That means swapping a Schlage deadbolt isn’t just “buy a lock, install a lock.” It’s matching the exact finish, often a specific oil-rubbed bronze or satin nickel, so the HOA’s property inspection doesn’t flag the house. We’ve seen homeowners fail inspections over a brushed nickel knob on a street where every front door wears aged bronze. When we install Schlage hardware in these neighborhoods, we verify the community spec first. That’s the difference between a locksmith who works in Longwood and one who understands how Longwood works. We bring the same local knowledge to Schlage in Casselberry. Our most recent example came from a homeowner near The Springs on the Markham Woods side. Her Schlage BE365 keypad deadbolt had stopped responding after a stretch of humid afternoons. The touchpad was dead and her backup key was stiff in the cylinder. We pulled the unit, confirmed the keypad module was shot, swapped in an OEM Schlage module, re-lubed and re-pinned the cylinder, and matched the finish to the community’s front-door spec so she’d pass her HOA check. She was back to keyless entry the same visit.
Schlage Models & Products We Service in Longwood
We work on the full Schlage range you’ll actually find in Longwood homes. The F-Series knobs and single-cylinder deadbolts in older ranch houses. The B60 and B62 deadbolts that builders loved for years. The BE365 keypad and BE489 Encode smart deadbolts that are common in the newer gated communities. And we handle commercial ND-Series and Grade 1 deadbolts for business owners in Longwood who need commercial-level reliability. For repairs, we use genuine Schlage OEM cylinders, pins, and keypad modules. That keeps the finish consistent and the tolerances right. For strikes and reinforcement plates where OEM isn’t practical, we use quality aftermarket hardware. The right lock only works if it’s installed right.
Schlage Service Pricing in Longwood
Schlage service costs vary by what you need, and we’d rather give you an honest range than a bait price. A straightforward rekey of a Schlage knob and deadbolt to one key typically runs $65 to $120 in Longwood. Deadbolt installation on standard prep runs $95 to $180 for the labor, not counting the hardware you select. Smart lock installation, including Encode or BE365 units, runs $120 to $250 depending on door prep and whether we’re dealing with existing Schlage hardware. If a B60 cylinder needs re-pinning due to corrosion, figure an additional $25 to $45 on top of the service call. Every quote we give you on the phone is the full price. No dispatch fee added when we arrive, no “it turned out to be more” line. We tell you the number, that’s the number on the invoice. Call (833) 713-2331 for a free estimate on Schlage work in Longwood.
Serving Longwood, FL — Our Local Coverage Area
We’re based in the Longwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Longwood
Yes, we match Schlage finishes to Longwood HOA specs as standard practice in gated communities like The Springs and the Markham Woods corridor. We confirm the required finish before installing, so you don’t fail a property inspection. This is not a service every locksmith in the area thinks to ask about. Call (833) 713-2331 and we’ll verify your community’s spec.
Longwood’s humidity gets inside the cylinder and gums up the pins and springs, especially in older 32750 slab homes where the deadbolts haven’t been serviced in years. The key sticks because the internals are corroding, not because the key is worn. We clean, re-pin, and lubricate, and the lock turns like it should. If it’s too far gone, we’ll tell you straight and replace the cylinder with an OEM part.
It could be either, and the way to tell is a proper diagnostic. Dead batteries after a humid stretch are common; so are failed keypad modules. We test the module, check the battery contacts for corrosion, and replace only what’s actually failed. That saves you from buying a whole new Encode when a module swap fixes it. For an exact diagnosis, call (833) 713-2331.
Yes, and in many Longwood homes that’s the smarter move. If the F-Series hardware is mechanically sound, a rekey gets you one key for both locks at a fraction of replacement cost. If the internals are shot, we’ll tell you before we touch anything, and we’ll show you what a replacement actually costs. No upselling, just what the lock needs.
We do, and we’ve installed Encode and BE365 units throughout The Springs and the Markham Woods corridor, as well as Schlage service in Altamonte Springs. We walk through your community’s hardware requirements first so the install passes inspection, then we handle the mechanical and smart sides in one visit. For a quote on Schlage smart lock installation in Longwood, call (833) 713-2331.
Service Areas Near Longwood
We work throughout Longwood and the surrounding cities. If you’re in Orlando, Conway, Pine Castle, Fairview Shores, or Holden Heights, give us a call. For Schlage work east of Longwood, see Schlage service in Winter Springs. For the northwest side, Schlage service in Apopka covers that area. And our Longwood service area page has the full list of neighborhoods and zips.
Book Your Schlage Service in Longwood Today
Need a Schlage rekey, a deadbolt that finally turns, or a smart lock that works with your HOA? We also cover Schlage in Lake Mary. Call (833) 713-2331. We’ll give you a straight price on the phone and get your Longwood service scheduled.
Written by Glenn Tarpley, Owner at Ashgrove Locksmith, serving Longwood and Central Florida for over two decades.